WHY SWYFTX?
NO HOSE. NO BUCKET. JUST SWYFTX.
SwyftX eliminates the need for a hose, bucket or rinse. Its high-lubricity formula lifts light dirt and contamination while cleaning, conditioning and protecting the surface in one fast process. With 15% SiO₂, every wipe leaves behind enhanced gloss, slickness and ceramic protection.
3-IN-1 CERAMIC TECHNOLOGY
CLEAN. CONDITION. PROTECT.
SwyftX does more than clean. Its 15% SiO₂ formula conditions the surface while leaving behind enhanced gloss, slickness and hydrophobic ceramic protection — all in one simple spray-and-wipe application.
FORMULA INTEL // SWYFTX
15% SiO₂
CONCENTRATION
3-IN-1
CLEAN • CONDITION • PROTECT
ZERO WATER
REQUIRED
16 FL OZ
BOTTLE SIZE
NO WATER. NO SETUP.
No hose, bucket or rinse required. SwyftX makes it easy to maintain your vehicle at home, in the garage, or anywhere traditional washing isn't practical.
SHOW READY
Quickly remove light dust, fingerprints and road grime before a show, meet or event while restoring gloss, slickness and a freshly detailed finish.
ROAD READY
Keep SwyftX in your detailing kit for quick cleanups on road trips, at hotels or anywhere your vehicle needs a refresh — no wash bay or water source required.
TWO WAYS TO DEPLOY
WASH IT. OR REFRESH IT.
MISSION // 01 — CLEAN WITHOUT WATER.
Use SwyftX to safely remove light dirt, dust and road grime without a hose, bucket or rinse. Its high-lubricity formula helps lift contamination from the surface for a safer wipe.
MISSION // 02 — REFRESH THE FINISH.
Already clean? Use SwyftX as a quick detailer to remove fingerprints, light dust and fresh contaminants while boosting gloss, slickness and SiO₂ protection.
APPLICATION PROTOCOL
SPRAY. LIFT. FINISH.
01 // ASSESS
Use SwyftX on surfaces with light dirt, dust, fingerprints, water spots and everyday road grime. For heavily soiled or muddy vehicles, perform a traditional wash first.
02 // DEPLOY
Shake well. Spray SwyftX generously onto a small section at a time, allowing the high-lubricity formula to surround and loosen surface contamination.
03 // LIFT
Using a clean, plush microfiber towel, gently wipe in straight lines to lift dirt and contamination away from the surface. Avoid applying excessive pressure.
04 // FINISH
Using a second clean, dry microfiber towel, lightly buff the surface to reveal a clean, slick and glossy finish.
05 // REPEAT
Continue working one section at a time, switching to a clean side of the towel frequently to avoid transferring removed contamination back onto the surface.
FIELD NOTE // For dirtier surfaces, use additional SwyftX and multiple clean towels. More lubrication and clean towel surfaces help minimize the risk of marring during a waterless wash.
SWYFTX // FIELD INTEL
COMMON QUESTIONS. CLEAR ANSWERS.
Typical quick detailers are primarily designed to remove light dust and enhance shine. SwyftX combines waterless cleaning with a 15% SiO₂ ceramic formula, allowing it to clean, condition and protect in one process while enhancing gloss, slickness and hydrophobicity.
Yes. SwyftX can be used for routine maintenance over existing protection. It removes light contamination while leaving behind additional SiO₂-based gloss, slickness and hydrophobicity.
As often as needed, provided the vehicle is only lightly soiled and the surface is suitable for waterless washing. SwyftX can be used between traditional washes to remove light dust, fingerprints and everyday contamination.
Wrap materials and finishes vary, so always test SwyftX on a small, inconspicuous area first to ensure the desired result. This is especially important with matte, satin and specialty wraps.
For best results, no. Apply SwyftX to a cool surface out of direct sunlight. Working on hot panels can cause the formula to dry too quickly and make it more difficult to wipe cleanly.
No. SwyftX is intended for light dirt, dust, fingerprints and similar contamination. Do not use it on surfaces covered in mud, sand or excessive grit, as wiping abrasive contamination across the surface may cause scratching. For heavily soiled vehicles, perform a traditional wash first.
Use a clean, soft double-plush microfiber towel. The plush fibers help lift contamination away from the surface during the wipe. Fold the towel into multiple sections, rotate to a clean side frequently and replace it if it becomes heavily soiled. Our color-matched Double-Plush Microfiber Towel is designed specifically to pair with SwyftX.
Yes. SwyftX doubles as a ceramic quick detailer. Use it to remove fingerprints, very light dust and fresh contamination while enhancing gloss, slickness and hydrophobic protection.
SwyftX is designed for multiple exterior surfaces including paint, carbon fiber, PPF, wraps, glass, lights, trim and wheels. Always test specialty materials and wraps in an inconspicuous area first.
When contamination is too heavy for a waterless wash, switch to a traditional contact wash. pHoamX – Ultra Foam Soap is the ideal companion to SwyftX because its pH-neutral formula safely cleans protected surfaces without adding waxes. After washing and drying, SwyftX can be used again for quick maintenance between washes.
SwyftX is designed primarily for cleaning and maintenance. It removes light contamination without water while leaving behind 15% SiO₂ ceramic protection. CeramX – Sealant & Booster is a dedicated 30% SiO₂ ceramic sealant engineered for substantially longer-lasting protection. Use CeramX as your primary protective layer and SwyftX for convenient maintenance between washes.
One 16 fl oz bottle can clean 4+ vehicles. Actual usage will vary depending on vehicle size, surface condition and how much product is required during each application
THE SWYFTX ADVANTAGE
Clean, shine and protect wherever you are. SwyftX combines waterless cleaning with 15% SiO₂ ceramic protection for a fast, slick, glossy finish — no rinse required.
FIELD REPORTS
PROVEN IN THE FIELD.
Read the field reports from customers who put CeramX to the test.