The Ultimate Heavy Duty Wheel and Tire Cleaner

MISSION BRIEFING // GRYMX

Brake dust, stubborn road grime, and tire browning can turn even the best-looking wheels into an eyesore.

Regular washing helps maintain your wheels, but what happens when everyday wheel cleaners aren't strong enough to remove accumulated contamination?

That's when you need a deeper cleaning solution.

Meet GrymX — Heavy Duty Wheel & Tire Cleaner by Top Secret Formulas, a Pro-Grade, acid-free alkaline cleaner formulated at pH 10.5 to tackle stubborn buildup on wheels and tire sidewalls.

Heavy contamination. Heavy-duty cleaning. One Pro-Grade formula.

Why Do Wheels and Tires Need Deep Cleaning?

Your wheels and tires face some of the harshest conditions on your vehicle.

Every time you drive, they encounter brake dust, road grime, dirt, moisture, and environmental contamination.

Over time, this buildup can become increasingly difficult to remove with a regular maintenance wash.

Common contamination includes:

• Brake Dust: Particles generated during braking accumulate on wheel surfaces and can become difficult to remove.
• Road Film: Oils, dirt, and road contamination create stubborn buildup.
• Tire Browning: Protective compounds within tire rubber can migrate to the surface, contributing to discoloration.
• Old Tire Dressing: Previous applications can leave residue that interferes with a fresh, even tire finish.
• Embedded Grime: Neglected wheels and tire sidewalls often require additional cleaning power.

FIELD INTEL: Routine cleaning helps prevent buildup, but neglected surfaces may require a dedicated heavy-duty cleaning process.

What Makes GrymX Different?

Not all wheel cleaners serve the same purpose.

GrymX is engineered specifically for situations where routine maintenance products may not deliver the cleaning strength required.

01 // Acid-Free Alkaline Cleaning

GrymX uses an acid-free formula with a pH of 10.5.

Its alkaline cleaning chemistry helps break down accumulated brake dust, road film, old tire dressing, and other stubborn contamination.

Unlike acidic wheel cleaners, GrymX achieves its cleaning performance without relying on acid-based chemistry.

However, acid-free does not mean every wheel finish is automatically compatible. Proper product selection and application remain essential.

02 // Heavy-Duty Wheel Cleaning

Brake dust and road contamination can accumulate in wheel barrels, around lug nuts, and across spoke surfaces.

GrymX helps loosen stubborn buildup so it can be removed through appropriate agitation and thorough rinsing.

03 // Tire Browning and Dressing Removal

Tires collect far more than surface dirt.

Old tire dressing, road grime, and natural rubber blooming can create brown or uneven-looking sidewalls.

GrymX is formulated to deep-clean tire rubber, removing surface buildup and preparing the sidewalls for fresh dressing.

04 // Adjustable Cleaning Strength

Not every cleaning job requires full-strength product.

GrymX can be used at full strength for heavier contamination or diluted up to 4:1 for lighter cleaning applications, according to product instructions.

This flexibility allows detailers to adjust cleaning strength based on the condition of the wheels and tires.

GrymX vs. SurfX: Which Cleaner Should You Use?

Choosing the appropriate cleaner is just as important as using the correct technique.

SurfX // Routine Maintenance

For regular wheel and tire cleaning, SurfX All Purpose Cleaner is the recommended maintenance option.

Its pH-neutral formula is designed to remove fresh brake dust, light road grime, and everyday contamination.

Best for: Regular washes, lightly soiled wheels, and routine tire maintenance.

GrymX // Heavy-Duty Reset

When brake dust, stubborn grime, old tire dressing, or tire browning accumulates, GrymX provides stronger cleaning performance.

Best for: Heavily soiled wheels, neglected tire sidewalls, and periodic deep-cleaning operations.

THE TAKEAWAY: Use SurfX to maintain clean wheels and GrymX when your wheels and tires need a more thorough reset.

Deployment Protocol: How to Use GrymX

Follow these steps for controlled, effective cleaning.

01 // Prepare the Surface

Park your vehicle in a shaded location and allow the wheels and tires to cool.

Avoid applying GrymX to hot surfaces or in direct sunlight.

Before using GrymX on aftermarket, refinished, damaged, or specialty wheel finishes, test an inconspicuous area for compatibility.

02 // Apply GrymX

Spray GrymX evenly onto the compatible wheel surface and tire sidewall.

Pay particular attention to areas with stubborn brake dust, road grime, old dressing residue, and tire browning.

For lighter contamination, GrymX may be diluted up to 4:1.

03 // Agitate the Contamination

Use the appropriate wheel and tire brushes to work the product into contaminated areas.

A soft wheel brush can help clean compatible wheel finishes, while a dedicated tire brush can assist with stubborn buildup on the rubber sidewalls.

Clean around spokes, lug nuts, wheel barrels, and other difficult-to-reach areas as appropriate.

04 // Rinse Thoroughly

Rinse the wheel and tire thoroughly with clean water.

Never allow GrymX to dry on the surface.

Work on one wheel and tire at a time to maintain control over the cleaning process.

05 // Inspect and Repeat

Inspect the wheel and tire after rinsing.

If heavier contamination remains, repeat the process as necessary, following the product instructions.

Once clean, rinse completely and allow the tire sidewall to dry before applying a dressing.

Complete the Mission: Clean, Then Protect

Deep cleaning is only the first step toward a freshly detailed wheel and tire appearance.

After removing road grime, tire browning, and old dressing buildup, you have a cleaner foundation for applying tire protection.

For a darker, glossier finish, follow with ShynX Glossy Tire Shine.

ShynX is formulated to deliver a rich, semi-wet gloss with a fast-drying, dry-touch finish.

Apply ShynX evenly to clean, completely dry tire sidewalls using a foam applicator. Remove any excess and allow the dressing to dry before driving.

FIELD NOTE: Apply tire dressing only to the sidewalls, never the tread.

Frequently Asked Questions

Is GrymX safe for clear-coated wheels?

GrymX is designed for compatible clear-coated wheels when used as directed. Always apply it to cool surfaces, rinse thoroughly, and avoid allowing the cleaner to dry. Test unfamiliar or specialty finishes before application.

Is GrymX an acidic wheel cleaner?

No. GrymX is an acid-free alkaline cleaner with a pH of 10.5.

Can GrymX remove tire browning?

GrymX is formulated to remove surface browning and accumulated contamination from tire sidewalls. However, tire blooming is a natural process that may recur over time.

Should I use GrymX every time I wash my car?

Not necessarily. GrymX is primarily designed for heavier cleaning. For routine wheel and tire maintenance, use SurfX All Purpose Cleaner.

Can GrymX be diluted?

Yes. GrymX can be diluted up to 4:1 for lighter cleaning operations, according to the product instructions.

Can I use GrymX before applying tire shine?

Yes. GrymX is designed to remove buildup and prepare tire sidewalls for fresh dressing. Rinse thoroughly and allow the tire to dry completely before applying ShynX.

Final Debrief: Reset Your Wheels and Tires

When your wheels and tires need more than routine maintenance, it's time to deploy a stronger cleaning solution.

With its acid-free, pH 10.5 alkaline formula, GrymX delivers the Pro-Grade cleaning power needed to tackle stubborn brake dust, road grime, tire browning, and old dressing buildup.

Whether you're a weekend enthusiast or professional detailer, GrymX gives you an effective way to reset heavily contaminated wheels and tires.

DEEP CLEAN. RESET THE SURFACE. RESTORE THE LOOK.

Ready to deploy?

SHOP GRYMX HEAVY DUTY WHEEL & TIRE CLEANER →

Born in the Lab. Proven in the Field.